The AC255NT Series
| Tonnage |
20 metric / 22 U.S. |
| Press drive system |
Single motor AC servo drive |
| Stroke length |
42 mm / 1.65´´ |
| Max. thickness |
3.2 mm / 0.12´´ (standard brush table)
6.4 mm / 0.25´´ (high density brush table) — OPTIONAL |
| AC-2510NT Travel Range |
1270 mm x 2500 mm / 50´´ x 98.4´´ |
| AC-255NT Travel Range |
1270 mm x 1270 mm / 50´´ x 50´´ |
| Max. feed rate |
X axis: 80 m per min. / 3,150´´ per min.
Y axis: 60 m per min. / 2, 362´´ per min. |
| Max. weight of material |
50 kg / 110 lbs. (F1 speed) •
150 kg / 331 lbs. (F4 speed) |
| AC-2510NT Max. hit rate |
X Axis 350 HPM • Y Axis 280 HPM (on 1´´ pitch at 0.118´´ stroke)
900 HPM (at 0.019´´ pitch and 0.055´´ stroke) for marking pattern |
| AC-255NT Max. hit rate |
X Axis 370 HPM • Y Axis 275 HPM (on 1´´ pitch at 0.118´´ stroke)
900 HPM (at 0.019´´ pitch and 0.055´´ stroke) for marking pattern |
| Punching accuracy |
± .1 mm / 0.004´´ and ± .07 mm / 0.002´´ (Fine Accuracy mode) |
| Turret rotation speed |
30 rpm |
| Auto-Index rotation speed |
60 rpm |
| NC control |
AMNC/PC |
| Power requirement |
19kVA |
| Max. air consumption |
750 NI/min. / 2.7 cubic feet |
| AC-2510NT Machine mass |
13 metric tons / 28,660 lbs. |
| AC-255NT Machine mass |
12 metric tons / 26,400 lbs. |
Amada’s new AC-NT series machines give fabricators the opportunity to affordably take advantage of the many newer processing capabilities available in punching — along with the additional benefits of a machine that is both environmentally-friendly and costs significantly less to operate and maintain than some older technologies.
AC255NT Series Standard Features
- The AC-NT series utilizes an AC servo motor to drive the ram (eliminating the hydraulic power supply and chiller
- Electrical consumption is less than one-half of comparable hydraulic machines
- Higher positioning speed improves productivity
- Space-saving design takes the cost of valuable floor space
- The AC-NT offers significantly faster punching speeds than mechanical turrets
- Brush table design provides scratch-free processing, eliminating secondary finishing, and also minimizes noise during positioning
- PC-based network CNC Control
- Connectivity with your entire shop through the machine’s NT-based controller, instantly access part programs, multi-media help files and production schedules
- Power vacuum slug pull system (patent pending) virtually eliminates slug pull concerns
- Available with 45 or 51 station, 4 auto-index turrets (58 station, 2 auto-index special order)
Amada RG-50 Hydraulic Press Brake
| Model |
RG-50 |
| Year Built |
2004 |
| Capacity |
55 Tons |
| Overall Bending Length |
82″ |
| Distance Between Housings |
60″ |
| Stroke |
3.937″ |
| Throat Depth |
15.75″ |
| Open Height |
14.57″ |
| Speeds (Approach) |
1.8 IPS |
| (Bending) |
.33 IPS |
| (Return) |
1.38 IPS |
| Overall Dimensions |
80″x55″x76″ H |
| Approx. Weight |
6,500 LBS |
| Model |
RG-35 |
| Year Built |
2005 |
| Capacity |
35 Tons |
| Overall Bending Length |
49.5" |
| Distance Between Housings |
42″ |
| Stroke |
3.937″ |
| Throat Depth |
15.75″ |
| Open Height |
14.57″ |
| Speeds (Approach) |
1.8 IPS |
| (Bending) |
.33 IPS |
| (Return) |
1.38 IPS |
| Overall Dimensions |
60″x45″x66″ H |
| Approx. Weight |
5,500 LBS |
| 
